Success Story: Jet-A Fuel Filters Save International Airport
After years of solicitation, I finally got the filter business of an international airport! Here’s my story…
My big break came from the airport’s fuel tank farm manager. He called me because he was going through jet fuel filters so quickly that his current supplier couldn’t keep him stocked. Actually, he was using up not just the pre-filters, but also the down-stream filter coalescers as well, which are relatively expensive to replace. I decided to investigate further by asking a few more questions. He explained that the jet fuel was very dirty, and he figured that the frequent filter change-outs were the culprit of the heavy solids found in the fuel. As we discussed his current filter setup in detail, he informed me that both the housing pre-filters and the coalescers were rated at 5-micron. Well, therein lied the problem!
When dealing with solid contamination in jet fuel, it is much less expensive to use a tighter pre-filter to remove dirt contamination than to use your fuel-water separator filter (the coalescer) as the particulate filter. I suggested to the fuel tank farm manager to try our 2 micron pre-filters in place of his current 5-micron filter elements. He took my suggestion, and even three weeks later he hadn’t changed a single set of coalescer elements!
Since the airport installed our pre-filters, they’ve been replacing the 2-micron pre-filters much less frequently than the original 5-micron filters. The manager also reported that the new pre-filters were easier to change, and by not having to deal with the coalescer housings they were saving more labor hours as well. All in all, it’s been a win-win situation between our companies. My customer is continuously saving time and money, and I gained the business and the trust of a new customer.
Until next time!
Charlie at Precision Filtration Products
P.S. Have you seen our latest videos? If not, click here to check them out now!